Press the PWR key for one (1) second.

When the phone is turned on, all LCD indicators light momentarily, followed by an audible tone ("wake-up"). Your own telephone number appears briefly. (If the phone is locked, the auto answer function is active or the call restriction is on, your own telephone number is not displayed.)

The "-ON-" message will be displayed to show that the phone is on. (If you selected the status monitor mode, status information will be displayed instead of the "-ON-" message.)

If your telephone number is "1234567890"

¯

If the automatic answer mode is active, the following message will be displayed instead of the phone’s telephone number.

Unless "No Restr" has been selected for the call, the selected restriction level message will appear instead of the phone’s telephone number.

Restriction level "Local Only"

One second after displaying the telephone number the battery indication in the upper left corner shows:

: high level

: medium level

: low level

Low BAT : low battery

The message "Low BAT" means the battery must be charged as soon as possible. The B indicator will also begin to flash.

The electronic lock is on when the "Locked" message appears on the display. To unlock, enter your three (3) digit unlock code. Once the phone is locked, the only call which can be made is to emergency number 911 if your carrier offers this emergency service.

If the "NO SVC" indicator remains in the display or appears at a later time after turning the phone on, it may indicate that you are out of the cellular service area. Calls cannot be initiated or received when "NO SVC" is displayed.

If an error message such as "CHECK 3" appears in the display, the phone should be taken back to your local dealer for service.