STORING OFTEN-USED NUMBERS

Your phone allows storage of 39 frequently dialed telephone numbers and names in the phone's memory. The names can contain up to 11 characters. The 39 memory locations are numbered 01 to 39.

1. Enter the telephone number.

2 Press the "STO" (STORE) key. The following message is shown:

Enter

Addr.

3. Enter a two (2) digit memory location (from 01 to 39).

a. If entered memory location is vacant, the telephone number is then stored to this memory location. The display will indicate:

Stored

Addr.01

b. If entered memory location has another telephone number, the current telephone number is displayed for two (2) seconds. The "overwrite warning tone" will also be heard. The confirmation message will be displayed:

 

01:JOHN

3214567

¯ 2sec

Replace

* :Y/#:N

If "* " key is pressed, the new telephone number will replace the existing number and the display will be changed as indicated below.

If "#" key is pressed, the display will be changed to the "Enter Addr." message, allowing a different memory location to be entered.

And if the "CLR" or "END" keys are pressed, the entered telephone number is canceled and the phone will exit from the store mode.

Any other key entries (except for "PWR" key) are ignored and an error tone is heard.

Stored

Addr.01

Note:
· When this storing procedure is used, the old phone number's corresponding alphabet name is cleared.