FCN 94: PIN Number Enable

Direct Operation: FCN + 9 + 4 + (Security Code) (Standby only)

If a PIN number is programmed:

PIN

ON

­ Press */# key

¯

PIN

OFF

If no PIN number is programmed:

PIN

N.A.

Function: When you enter "FCN" followed by "9 + 4 + (Security Code)", the phone enters the "PIN Number Enable ON/OFF" mode and shows the current setting.

The ON/OFF setting can be selected by pressing the * / # keys.

When this function is ON the PIN number is automatically sent to the base station. It can also be sent by using the "Flash Request".

In order to complete your selection and exit from this mode, press the "STO," "END," or "CLR" key.

 

Note:
· This PIN number complies with the AT&T network systems method as detailed in the Subscriber PIN Access (SPINA) document. The Ericcson network systems method is not supported. Check with your carrier for more information.

· Pressing the "s" or "t" key at this stage will scroll through the secondary menu of the Security Function.