PIN Number Programming (FCN 95)

Direct Operation: FCN + 9 + 5 + (Security Code) (Standby only)

If a PIN number is programmed:

PIN No.

1234



If no PIN number is programmed:

PIN No.

____

 

Function: When you enter "FCN" followed by "9 + 5 + (Security Code)", the phone enters the "PIN Number Programming" mode and shows the current programmed PIN number.

A new PIN number may be programmed by entering a new four (4) digit PIN number. The PIN number can be cleared by pressing "CLR" after the digits are entered.

The PIN number can be erased by pressing "FCN". The phone will then return to the "-ON-" screen.

If the PIN number is erased, the PIN number enable state will be set to "OFF" (FCN 94), and that screen will now read "PIN N.A."

To complete your selection and exit from this mode, press the "STO" or "END" key.

Default settings for each function:
1) Automatic retry (FCN 1) OFF

2) System selection (FCN 4)

 Pref.Sys.

3) Auto answer mode (FCN 5)

 OFF

4) Last talk time (FCN 7)

 00m00s

5) Restriction level (FCN 91)

No restr
6) Status monitor (FCN 93) OFF

7) PIN status (FCN 94)

 OFF

8) PIN number (FCN 95)

 Null