|
ONE TOUCH DIAL NUMBER - STORE/RECALL (1) STORE Direct Operation: (Telephone number) + STO + P (Standby only)
Function: If you want to set or change the "One Touch Dial Number", enter the one touch dial number and depress the "STO" key followed by "P". This memory can hold up to 32 digits. Note: (1) If the one touch dial memory has another telephone number: The current telephone number is displayed for two (2) seconds. The "overwrite warning tone" will be heard, and the confirmation message will be displayed.
¯ 2sec
If "* " key is pressed, the new telephone number will replace the existing number. If "#" key is pressed, the display will be changed to the above "Enter Addr." message, allowing a different memory location to be entered. And if the "CLR" key is pressed, the entered telephone number is canceled and the phone will exit from the store mode. Any other key entries (except for the "PWR" key) are ignored and an error tone will be heard. (2) RECALL Direct Operation: RCL + P (Standby only)
Function: If you want to recall the "One Touch Dial Number", enter the "RCL" key followed by "P". The current one touch dial number will be displayed.
|