Quick Reference Guide
Functions List
Access functions by pressing FCN and then the desired function number. Once you display a function prompt, you can use s and t to move through the other functions.
You can optionally press FCN twice to display the main function menu prompt, and then use s and t to scroll through each function. To select a function, press FCN again. You can then use s and t to scroll through the function sub-menus.
Use j and # to scroll through the available settings for most functions.
TELEPHONE NUMBER FUNCTIONS
FCN 1 Display Own Number
GENERAL SETTINGS FUNCTIONS
FCN Call Mute (hold down for 1 second)
FCN 0 Pause
FCN 2 Automatic Retry On/Off
FCN 3 System A/B Selection
FCN 4 Automatic Answer
FCN+Talk Automatic DTMF Transmit
TIMERS
FCN 6 Last Talk Time
FCN 7 Total Operating Time
VOLUMES/TONES
FCN s/t Ring Volume
LOCK
FCN 5 Lock
SECURITY FUNCTIONS (must enter 4-digit Security Code)
FCN 81 Call Restriction Setting
FCN 82 Program Unlock Code
FCN 83 Status Monitor On/Off
FCN 84 Program PIN Number
FCN 85 Automatic PIN Enable/Disable
Default Function Settings
| Function | Default Setting |
| Automatic Retry (FCN 2) | On |
| System A/B Selection (FCN 3) | Preferred system in NAM |
|
Auto Answer (FCN 4) |
OFF |
|
Last Talk Time (FCN 6) |
Displays mm-ss |
|
Restriction Level (FCN 81) |
No restriction |
|
Status Monitor (FCN 83) |
Off |
| PIN Number (FCN 84) | Null |
| PIN Status (FCN 85) | Off |
Messages and Prompts Glossary
|
AutoAns |
Displays when you turn the phone on if Automatic Answer is enabled (FCN 4).
|
| Button Loc |
Displays when the Keypad Lock function is enabled.
|
| Call |
Flashes when you receive a call. Press TALK to answer the call.
|
| Called |
Displays after an unanswered call.
|
| Code Error |
Displays if you enter the incorrect unlock code.
|
|
Empty |
Displays when you try to recall a phone number from a location that is empty. Press END to return to Standby.
|
|
Enter Addr |
Displays during storage operations. Enter the memory location for the phone number.
|
|
Erase 1-y 2-n |
Displays for you to confirm the deletion of a stored number.
|
|
Erased |
Displays to confirm erasure after you have cleared a memory location. The address of the cleared location also displays.
|
|
Error |
Displays when there is a problem with your phone’s programming or circuitry. Write down Error number and bring phone in for service.
|
|
Fcn |
Displays after you press FCN. Enter the desired function number.
|
|
Full |
Displays if the phone's memory locations are full when you try to store a number.
|
|
Last |
Displays for the Last Talk Time (FCN 6).
|
|
Local |
Displays when you turn the phone on if the Call Restriction level (FCN 81) is set to Local Only.
|
|
Loc'd |
Displays while your phone is locked. Enter the 3-digit Unlock Code.
|
|
Loc Code |
Enter your 3-digit Unlock Code. Code
|
|
Mute |
Displays when you turn off your phone’s microphone during conversation by pressing FCN. Press FCN again to turn it on.
|
|
No Pin |
Displays when you select PIN Enable (FCN 85) and no PIN is currently programmed.
|
|
-On- |
Displays during Standby mode.
|
|
Oper |
Displays when you select Operating Timer (FCN 7).
|
|
Pin |
Displays when you select PIN Enable (FCN 85) and no PIN Number is currently programmed.
|
|
Pin no ---- |
Displays when you select PIN Number Programming (FCN 84) and no PIN is currently programmed.
|
|
Pin nA |
If you select PIN Enable (FCN 85) and the system does not support the PIN feature, this message will be displayed when you make a call.
|
|
Rcl 1-19 |
Displays when you turn the phone on if the Call Restriction level (FCN 81) is set to Recall 1-19.
|
|
RecOnly |
Displays when you turn the phone on if the Call Restriction level (FCN 81) is set to Receive Only.
|
|
Replace 1-y 2-n |
Displays when you try to store a phone number into a memory location that already contains a number. Confirm the replace.
|
|
Restr |
Displays when selecting the Call Restriction level (FCN 81).
|
|
Retry |
Displays when you enable Automatic Retry (FCN 2).
|
|
Ring |
Displays when you adjust the Ring Tone volume. Use FCN + s and t during Standby to adjust the Ring Tone volume.
|
|
Roam Inhibit |
Displays when you select an alternate system in System A/B Select and Roam Inhibit is programmed in NAM.
|
|
Secure 1-5 |
Displays when you press FCN 8. Select the security function 1-5.
|
|
Secure Code |
Displays when you try to use functions 81-85. Enter your 4-digit Security Code.
|
|
Status |
Displays when you select Status Monitor (FCN 83).
|
|
Stored Addr xx |
Displays with the memory address number (xx) after you store a phone number in a memory address.
|
|
Stored Addr P |
Displays after you store the One-Touch Phone Number.
|
|
System |
Displays during System A/B Selection FCN 3).
|
|
Tel- |
Displays when you select Display Own Number (FCN 1).
|
|
Tone |
Displays when you adjust the Key Tone volume. Use s and t during Standby to adjust the Key Tone volume.
|
|
Unloc |
Displays when you select Program Unlock Code (FCN 82).
|