G100e/150 Phone w/Call Outs

 

 

 

Main Display Format

Center displays text and outside displays symbolic icons indicating the phone’s status.

Your Service Provider may use all, some or none of these icons. Contact your Service Provider regarding the icons they use with their system.

SIM Memory—the SIM memory has been accessed

Edit Mode—enter or edit alphanumeric information

Roaming—when out of range of home network and another network is available

Text Message—you have text messages

Voice Mail—you have voice mail

Call Forwarding—call forwarding is activated

Battery Level—indicates battery level; icon flashes when battery is low or being recharged

More—more menu options can be accessed by using the Express Key

Alternate Line Indicator—your second line is in use

Off-Hook—line is active

Received Signal Strength Indicator (RSSI)—signal strength of the selected network

Use Left on the Express Key to access the Memory Menu, to scroll through text messages and to return to a previous menu.

Use Right on the Express Key to access the Main Menu, to scroll through text messages and to select menu options.

andUse Up and Down on the Express Key to scroll through menus, options and text messages.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LED Indicator
Flashing Green—there is an incoming call.
Constant Red—the battery is charging.
Constant Green—the battery is at full charge.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tones

• Power On/Off—high-pitched beep sounds when you turn your phone on or off.
• Dial Tone—standard dial tone heard through the earpiece when you press before dialing a number.
• Ringing—choose from a variety of ring tones to sound when you receive a call.
• Call Waiting—normal Call Waiting tone heard through the earpiece.
• Key Tones—Dual Tone Multi-Frequency (DTMF) tones sound when you press numeric keys.
• Low Battery Alert—tone sounds every 20 seconds. After 1 minute, the phone terminates the call and turns off.
• Text Message Arrival Tone—beeps twice when you receive a text message.
• Cell Message Tone—one beep tone sounds when you receive a Cell Broadcast message.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Backlight
Backlight is on when your phone is connected to an external power source. On battery power, the backlight duration is selectable. When your phone is not connected to an external power source and the backlight feature is engaged, the backlight comes on after a key press or during an incoming call.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone Features
Your phone allows you:

• To place and receive calls
• To send Dual Tone Multi-Frequency tones
• To send and receive text messages*
• To display call costs*
• To perform Hold and Call Waiting*
• To have two lines [Alternating Line Service]*
• To perform Call Forwarding *
• To perform Call Barring*
• To show the number of the person who calls you*
• To hide your number from the person you call*
• To have conference calls*
• To receive Cell Broadcast messages*
• To access Closed User Group services*
• To store and retrieve numbers
• To retry calls
• To call stored numbers (unanswered and last dialed numbers)
• To display talk time
• To set up passwords such as Personal Identity Numbers
• To be notified of an incoming call with a ring, vibration or both (G150 only).
  * These features may not be available depending on your network subscription. Contact your Service Provider for more information.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery
Attaching the Battery

1. Insert the bottom of the battery into the clips.
2. Swing the battery downward until the top clicks into place.

Removing the Battery

1. Push up and hold the battery catch located on the back of the phone.
2. Lift the end of the battery up and away from the catch.

Charging the Battery

1. Connect the charger that came with your phone as shown in the diagram below.
2. Plug the charger into a standard 110 volt wall outlet.
   NOTE: Your phone may be used during charging.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery Charging Display
Power Off

• No external power supply—the display is empty and top LED is off.
• External power supply connected—top LED lights red and Charging displays.
• At full charge—top LED lights green and Battery Full displays.
• Problems charging—Check Battery displays.

Power On

• No external power supply—Idle/Standby Mode display and top LED is off.
• External power supply connected—Battery icon flashes from empty to full.
• At full charge—Battery icon stops flashing and indicates full charge.
• Problems charging—LED does not light and Battery Level icon does not display.

Low Battery
When the battery level falls to the lowest safe level, the Low Battery Alert Tone sounds and Low Battery! displays and flashes. The phone terminates any active calls after 1 minute.
The following is a chart containing the charge time for the 3 available battery packs:

	NiMH-S (600mAh)	NiMH-M (650mAh)	NiMH-L (1150mAh)
Recharge Time With AC Adapter (approx.)15min.	1hr.15min.	1hr. 25min.	2hr. 15min.

These are the charging time values under normal conditions (such as room temperature, and empty battery). Charging time may vary under different conditions.