Settings - customizing your phone

Keypad lock

When keypad lock is turned on it prevents accidental key operation and menu access. The key tones are also silenced.

Keypad lock is suspended during incoming calls and resumed when the call ends. Emergency calls can still be made.

From the standby display, to turn keypad lock on or off,

Using the menu to turn keypad lock on or off,

Alert mode

There are two ways to turn off the incoming ring tone, key tones and all alert tones and (Model G340) alarm tones.

From the standby display, to turn tones on or off,

Using the menu to turn the tones on or off,

Ring tone selection

Choose the sound of the incoming ring tone from a stored selection. To hear your chosen ring tone or melody, wait several seconds before confirming your choice. The tone or the melody will play.

Select the ring tone by,

Volume adjustments

The volume levels of the ring tone, key tones and incoming audio can all be adjusted by pressing or in the Settings menu:

Ramping

Ramping causes the incoming ring tone to gradually increase to maximum volume level if the call is not answered after the first ring.

Backlight - setting

This option controls the backlight during key entry or incoming ring tone.
There are two settings:

Display contrast

To modify the display contrast,

Language selection

If offered by your service provider, all the display messages can be shown in one of eight languages: English, Dutch, French, German, Italian, Spanish, Portuguese, Greek.

To select the language of your choice,

Softkeys - programming the softkeys (Model G340 only)

The right and left softkey shortcut can be changed so your standby display can have a shortcut to the menus of your choice. The options available are shown in the menu during selection.

There are two ways to program the softkeys:

From the standby display,

Using the menu,

Any key answer

This feature enables any key (except and Silence ) to be pressed to answer an incoming call.

Auto answer

When the phone is connected to a handsfree car kit or headset, the phone will automatically answer an incoming call after approximately 5 seconds without having to press any keys.

Auto retry

The phone will automaticaly redil the number of a faied cal , due to a system busy or unavailable signal from the network, up to 10 times.

Security features

The following 6 security features protect your phone from unauthorized use.

Keep a record of your code and keep them in a safe place. Failure to do so will cause you considerable inconvenience.

Phone lock code

The phone lock code, supplied with the phone, prevents unauthorized access to the phone.

The factory setting is 0000. We suggest that you reset this code and keep it in a safe place, separate from the phone.

The phone lock code is also required to reset the call timers. When ena-bled, the code will be asked for each time the phone is turned on.

To change the phone lock code,

To turn on or off the phone lock code,

PIN code

Your SIM is provided with a 4 to 8 digit PIN code to protect it from unauthorized use. When enabled, the PIN code will be asked for each time the phone is turned on. If you enter the wrong PIN code three times in succession your SIM card will be blocked and you will need the 8 digit PUK code from your service provider (see page 55).

To turn on and off the PIN,

To change the PIN code (PIN must first be enabled),

PIN2 code

The PIN2 code prevents unauthorized access to some features such as turning on or off FDN operations, modifying the FDN phone book, set-ting calls costs to zero, modifying the costs display features. It can be changed but not turned on or off.

To change the PIN2 code,

PUK code

The PUK (PIN unblock key) is an 8 digit code supplied by your service pro-vider. It is used to 'unblock' a PIN whose code has been entered incorrect-ly three times. A PUK code cannot be changed.
When requested enter the PUK code and press OK . You will then be asked to enter a new PIN code. Follow the display prompts to reset the PIN code.

PUK2 code

The PUK2 is an 8 digit code supplied by your service provider. It is used to unblock a PIN2 whose code has been entered incorrectly three times. A PUK2 code cannot be changed. When requested enter the PUK2 code.
You will then be asked to enter a new PIN2 code. Follow the display prompts to reset the PIN2.

Call barring password

The call barring password is used to select the call barring levels outlined in the Services - Call Barring menu (see page 45). It is obtained from your service provider.

To change the password,

Summary of code/password entry chart

Time & Date setting - Model G340 only

To set the current time and/or date:

Factory settings

Use the Settings menu to return the phone settings back to the factory set-tings. This has no effect on the phone book entries or phone lock code.

Factory default settings:

Office tools

The Office Tools menu contains a scratchpad and currency-converter calculator. Model G340 includes an Alarm clock feature.