-
What is the Security Code for my phone?
The default security code is 00000000 (eight 0's)
-
How do I set the voicemail number and password
in my phone?
Power the phone on. Press the Menu key and select 2
Messages, 1 Voice Mail, 2 Setup,Then press Add right
softkey. Enter the Access Number (which is typically
the cellular number for the phone), PIN number (the default
password for AT&T is #1111#. Contact your Service Provider
if that does not work) and name for the mailbox and press OK
left softkey. Press either Call left softkey or Add to
access the new mailbox.
-
How do I raise the ring volume for my phone?
Power the phone on. Press the Menu key and select 4
Preferences, 3 Volumes and 1 Ringer. Adjust the volume
by pressing up on the round key under the menu key.
-
How do I reset the talk timers in my phone?
Power the phone on. Press the Menu key and select 4
Preferences, 9 Security, and then 5 Reset Timers.
Press Yes to confirm. ***NOTE*** The Accumulated Talk
Time will not reset. This timer will show the total amount
of time that the phone has been used from the time it was activated.
-
If my phone is set with two phone numbers,
how do I choose between the two?
Power the phone on. Press the Menu key, select 4 Preferences,
and choose 5 Voice Network. Select the number you wish
to use and press the Ok softkey.
-
Can I use my T250/T255 to dial into my primary
ISP?
Unfortunately, you cannot. The T250/T255 is not capable of inputting
a "dial up" number. The T250/T255 connects to a CDPD
server. From that server, you may connect out onto the World
Wide Web. For billing questions please contact your service
provider.
-
Will my T250/T255 connect to my Palm
Pilot?
No. Currently, the T250/T255, when used in conjunction will
only tether to a Windows 95/98 compatible system.
-
Is my T250/T255 compatible with Windows NT
or 2000?
No. Mitsubishi currently does not support either of these Operating
Systems. Mitsubishi does support Windows 95 and 98
